The Hidden Problem in Your Mixes: No Distance, No Fresh Ears
Fixing a finished mix from stems: a readable vocal, kick and bass in balance, more cymbals.
Chapters
The most common problem for engineers isn’t missing gear or plugins — it’s losing distance and a fresh perspective on your own mix. Often one comment from an outsider makes obvious what you’d been missing. In this episode Wojtek Wieslawski fixes a mix by Łukasz Kaliszek, a student on his course about the most common mixing mistakes, and shows how it works in practice.
Plan first: what’s bothering us?
Before touching anything, name the problems. Here: the vocal is slightly buried, kick and snare dominate and aren’t glued into the mix, there aren’t enough cymbals, and something in the guitars’ upper mids, around 2–3 kHz, gets in the way.
Splitting stereo into stems
Only the finished stereo mix was available, so Wojtek split it into four stems (vocals, drums, bass, other) with iZotope RX. Cubase 15 or the free Moises.ai service can do it too. The separation isn’t perfect, but it’s enough to work with.
Vocal: intelligibility
Artists know their lyrics, so they tuck the vocal away — and listeners can’t understand the words. You can’t fix diction in the mix, but you can fix compression: a Distressor plus three dynamic EQ cuts (around 600 Hz, 2.6 kHz and 11 kHz), set while listening to the full mix. On the guitars, Trackspacer keyed from the vocal ducks them slightly whenever the singing comes in. A regular compressor with sidechain does the same job.
Drums and bass
- A duplicated drum track with no output to the mix, low-passed around 107 Hz, keys the bass sidechain — so the bass ducks only on kick hits, not snare.
- On the actual drum track: -4 dB around 105 Hz (the boom after each kick) and about 1 dB of glue compression.
- Mid/side around 6 kHz: a cut on the mid (kick and snare attack), about 2 dB boost on the side, where the cymbals live.
- Fast fills turned down by about 1.5–2 dB so they don’t jump out.
- Bass: a cut around 400 Hz and about 4 dB around 183 Hz, under the snare.
Guitars and the mix bus
Guitars: a cut around 160 Hz, a little more low end and a cut around 2.2 kHz — they become easier on the ear. On the master, a very gentle UA Capitol Mastering with saturation, three subtle EQs and a limiter. Result: a clearer vocal, kick and snare sitting in the mix, and a better-placed bass.
FAQ
How can I split a finished mix into stems?
With iZotope RX, Cubase 15 or the free Moises.ai. The separation isn’t perfect, but it’s fine for fixes.
Why does my own vocal always seem loud enough?
Because you know the lyrics. Let someone else listen and check whether they understand the words.
Tools in this episode
- iZotope RX (rozdział na stemy)
- Moises.ai
- UA Distressor
- FabFilter Pro-Q 3
- Wavesfactory Trackspacer
- UA Capitol Mastering
Work on your music
Music courtesy of: Łukasz Kaliszek – Prawda To Luksus.