Wojtek Wiesławski
Tutorials

How to Export Stems for Mastering (and Multitracks for Mixing)

Looking for how to export stems? First, make sure stems are what you actually need. I’m Wojtek Wieslawski, a mixing and mastering engineer (Behemoth, Vader, Decapitated), and half the files I receive as “stems” are really multitracks ⁠–⁠ or the other way round.

Stems vs. Multitracks: What’s the Difference?

  • Stems are finished stereo (L/R) bounces of whole instrument groups: all drums, all guitars, bass, all keys, all vocals. Played together at unity gain, they add up to your mix.
  • Multitracks are every track exported separately: kick in, kick out, snare top, each guitar, each vocal take.

For mixing send multitracks ⁠–⁠ see How to Prepare Tracks for Mixing. For stem mastering send stems.

When to Send Stems for Mastering

  • You’re happy with the mix, but want the mastering engineer to have more control (e.g. vocal level, low end, cymbals).
  • Your mix has a balance issue you can’t fix yourself.
  • You need instrumental, a cappella or TV versions.

Rules for Exporting Stems

  • Group stems logically: typically Drums, Bass, Guitars, Keys/Orchestra, Lead Vocals, Backing Vocals, FX. 4⁠–⁠8 stems is usually enough.
  • Stems must sum to the mix. Check it: import all stems into an empty session at 0 dB ⁠–⁠ they should sound exactly like your stereo mix.
  • Keep the mix processing on the groups, but bypass the master bus (limiter, master compressor, master EQ).
  • Reverbs and delays: print them on the stems they belong to, or as a separate FX stem ⁠–⁠ just don’t lose them.
  • Same start and end: every stem starts at the same point (bar 1 / 0:00) and runs to the end of the song, including tails.
  • Native sample rate, 24-bit or 32-bit float, no normalisation, no dithering.
  • Always include the stereo reference mix (the full mix exported the same way).
  • Name clearly: SongName_01_Drums.wav, SongName_02_Bass.wav …

How to Export Stems in Cubase

I mix in Cubase every day, so this is exactly how I’d export my own sessions. Menus below follow Cubase Pro 12⁠–⁠14; Elements and Artist work the same way, but without batch export of several channels at once (there you solo one group at a time and export it).

Before you export:

  1. Save a copy of the project (File > Save As).
  2. Set the locators from the very start of the song (bar 1) to a few seconds past the last note, so reverb and delay tails are included.
  3. Check routing: every track’s output must go to a group or the main stereo out. A channel with no output routing exports silence.
  4. Bypass the master bus ⁠–⁠ limiter, master compressor, master EQ.

Stems for mastering:

  1. Route each instrument group to a Group channel (Drums, Bass, Guitars, Vocals…).
  2. Open File > Export > Audio Mixdown.
  3. In Channel Selection click Multiple and tick the Group channels.
  4. Set the effects/processing option so group inserts and channel settings are included, but the master bus is not.
  5. File type: Wave; sample rate: the project’s own; bit depth: 32-bit (float) or 24-bit.
  6. Choose the folder and name format, then click Export Audio.
  7. Export the full stereo mix the same way as your reference.

Multitracks for mixing:

  1. File > Export > Audio Mixdown, Multiple.
  2. Tick all Audio and Instrument channels you want to send (Instrument tracks must be exported, not just the MIDI).
  3. Choose the option that exports the channels without inserts and channel processing ⁠–⁠ clean tracks.
  4. Mono and stereo: Cubase exports one channel format per pass, so do two passes ⁠–⁠ mono tracks as mono (Mono Downmix), stereo tracks as stereo.
  5. Same file settings as above, then Export Audio.

How to Export Stems in FL Studio

FL Studio exports from the Mixer, not the Playlist. One file = one Mixer insert. If two instruments share an insert, they end up in one file.

Before you export:

  1. Route every instrument and audio clip to its own Mixer insert, and name the inserts (Kick, Snare, Gtr L…).
  2. Disable effects on the Master insert ⁠–⁠ limiter, compressor, EQ.
  3. Start the song at bar 1 and leave a little space at the end for tails.

Stems for mastering:

  1. Route the instrument inserts into group buses (Drums, Bass, Guitars, Vocals…), each bus on its own insert.
  2. File > Export > Wave file, choose the folder.
  3. In the render window tick Split mixer tracks.
  4. Keep insert effects enabled so the bus processing is printed, but don’t enable master effects.
  5. Bit depth: 32-bit float or 24-bit; sample rate: the project’s own. Under tail options choose to leave the remainder so reverb tails aren’t cut.
  6. Click Start. FL renders every insert ⁠–⁠ send only the bus files as stems, plus a full stereo mix exported the same way.

Note: with Split mixer tracks, processing on downstream buses is not printed onto the individual track files ⁠–⁠ another reason to deliver the bus files as stems.

Multitracks for mixing:

  1. Each sound on its own insert, as above.
  2. Bypass mix effects on the inserts (EQ, compression, reverb). Keep only creative effects that define the sound. Split mixer tracks also prints each insert’s fader and pan, so reset faders to 0 dB unless a level change is intentional.
  3. File > Export > Wave file, tick Split mixer tracks, same settings.
  4. Send the individual insert files (not the buses). If you used MIDI drums or synths, send the MIDI too.

How to Export Stems in Reaper

In Reaper everything happens in one place: File > Render (Ctrl+Alt+R / Cmd+Alt+R).

Before you export:

  1. Save a copy of the project.
  2. Bypass the master track FX ⁠–⁠ limiter, compressor, EQ.
  3. Make sure the song starts at the same point for all tracks (project start).

Stems for mastering:

  1. Put each instrument group into a folder track (Drums, Bass, Guitars, Vocals…). A folder parent renders everything inside it, with its FX.
  2. Select the folder (parent) tracks.
  3. File > Render. Set Source: Stems (selected tracks). (“Master mix + stems” gives you the reference mix in the same pass.)
  4. Bounds: Entire project and add a short tail so reverbs aren’t cut.
  5. Format: WAV; sample rate: the project’s own; WAV bit depth: 32-bit float or 24-bit. No normalisation, no dither.
  6. Use the file name wildcards (e.g. $project_$track) so every stem gets its track name, then Render.

Avoid “Selected tracks via master” ⁠–⁠ it prints your master FX onto every stem.

Multitracks for mixing:

  1. Bypass mix FX on the tracks (keep only creative effects that define the sound). Rendered tracks include each track’s volume, pan and automation, so set faders to 0 dB and pan to centre unless the level or pan is part of the arrangement.
  2. Select all tracks you want to send (not the folders).
  3. File > Render, Source: Stems (selected tracks), same settings as above.
  4. Mono tracks as mono: set Channels: Mono and render mono tracks in a separate pass from stereo ones.

Check Before Sending

Whatever your DAW, import all exported files into an empty project at bar 1. Everything should play in sync ⁠–⁠ and stems should sound exactly like your mix.

Ready for Mastering or Mixing?

Send your stems for online mastering or your multitracks for mixing.

Explore mastering services