How to Prepare Tracks for Mixing (Rock & Metal): Multitrack Export Checklist
Wondering how to prepare tracks for mixing? Whether you recorded in a pro studio or at home, the way you record, edit and export your multitracks decides how good your rock or metal mix can get. Below is the exact checklist I give every band before online mixing and mastering – from recording levels to the final export.
About the author. I’m Wojtek Wieslawski, a mixing and mastering engineer and producer. From 1999 to 2025 I co-ran Hertz Studio in Poland, working on records by Behemoth, Vader, Decapitated, Hate and Hour of Penance. After 25+ years, I can tell you that most mix problems start long before the mix. This guide covers what I ask every band to do before sending me their tracks.
Multitracks vs. Stems for Mixing: What Should You Send?
- Multitracks are every track exported separately: kick in, kick out, snare top, each tom, each guitar, every vocal take you keep.
- Stems are finished stereo (L/R) bounces of whole instrument groups – all guitars, all keys, all vocals, the whole drum kit.
For mixing, send multitracks. Stems are for mastering or for mixes that are already finished. Going to stem mastering instead? See How to Export Stems.
1. Gain Staging: Recording Levels Before Mixing
- Let peaks sit around -10 to -6 dBFS and the average level around -18 dBFS.
- Never let anything hit 0 dBFS – digital clipping can’t be fixed in the mix.
- At 24 bits there’s no reason to record hot. Headroom is free; distortion is permanent.
- Tip: Gainstage Pro by Hertz Instruments helps you set consistent levels across the whole session.
2. Recording Guitars and Bass for a Metal Mix
- New strings means put on the same day you record. Most strings lose their top-end bite after a day or two of hard playing – bass strings especially. Any brand works as long as they’re new. My personal recommendation for bass is Elixir (no sponsorship – I just like them).
- Setup and intonation: get the guitar set up for your tuning. Low tunings need heavier gauges and correct intonation, or chords will never sound in tune.
- Tune before every take, especially for heavy, down-tuned riffs.
- Moderate gain: too much gain kills definition. Heaviness comes from tight double-tracking, not the gain knob.
- Double-track rhythm parts– play them twice (never copy-paste) and pan hard left and right.
- Always record a clean DI for guitars and bass, alongside your amp or plugin tone (Neural DSP, TONEX, STL Tones). No gate, no effects on the DI. This lets me reamp if needed – but also send your amp tones so I can hear what you were going for.
- Name pairs clearly (Gtr_L_Amp / Gtr_L_DI) and keep solos and leads on separate tracks.
- Watch: Guitar Tuning for Recording: Tune to the Attack, Not the Sustain and Why Your Guitar Is Out of Tune Even When the Tuner Says It’s Perfect.
From the studio: During a session with Hermh, we were working with a guitar that just wouldn’t hold its tuning properly. We spent more time tuning than actually recording – and that was incredibly frustrating for everyone. A properly set-up instrument saves hours, money and nerves.
Another time, a guitarist from a band I won’t name handed me his guitar. I hit the strings and they sounded completely dull. “Did you change your strings?” – “Yes, they’re practically new.” – “When did you put them on?” – “About three months ago.” Those are not new strings. Remember: new means put on the day you record.
3. Recording Acoustic Drums for Rock and Metal Mixing
- New heads, fitted the day before the session so they settle, then tuned carefully (a tuner such as Tune-Bot helps). Re-check tuning between songs.
- Don’t forget the resonant (bottom) heads. Replace the bottom heads on the snare and toms from time to time too. They aren’t hit, but they wear out – every retuning stretches them, and eventually they won’t hold a clean pitch.
- One track per microphone. Kick in and kick out on separate tracks.
- Triggers: if possible, use triggers at least on kick and snare and record each trigger on its own track.
- Clean close mics with minimal bleed make sample blending much easier.
- Phase: solve it with mic placement while tracking. Don’t time-align or “fix” tracks before export – I’ll handle that in the mix.
- Proven mics: kick (AKG D112, Audix D6, Shure Beta 52A), snare (Shure SM57), toms (Sennheiser MD421, e604), overheads/room (Austrian Audio OC818/CC8, Neumann KM184/U87, AKG C414).
From the studio: A drummer once arrived with his own kit – brand-new batter heads on top, but the bottom heads were worn out from being retuned countless times. They were almost impossible to tune, and he couldn’t understand why he should buy resonant heads when he never hits them. The bottom head shapes the tone and sustain of every drum – if it won’t tune, the drum won’t sound right.
4. Exporting MIDI and Virtual Drums for Mixing
- Send the MIDI. If your kick (or any drum) was played via MIDI straight into a sampler, I need that MIDI. If you converted your drums to MIDI afterwards, send that too.
- Export every drum as its own WAV: kick, snare, each tom, hi-hat, ride and every crash separately, plus overheads and room.
- Bleed: depends on what your plugin allows. I prefer exports without humanisation and without bleed.
- Turn off all processing inside the drum plugin – reverb, compression, EQ, saturation.
- Dynamics in extreme metal: in blast beats and fast double kick, too much velocity variation hurts. Aim for deliberate accents, not randomness.
- Drum libraries with real character help – for example Hertz Drums 2 or the Hertz Drums Bundle, built for extreme metal.
5. Recording Rock and Metal Vocals
- Mics: dynamic (Shure SM7B) or large-diaphragm condenser (Austrian Audio OC818, Neumann TLM 103).
- Distance and plosives: with an SM7B, 1–3 inches from the mic. Always use a pop filter.
- Headroom: leave more headroom for screams than for clean singing.
- Room: a treated booth is ideal; a closet full of clothes is a great DIY alternative.
- Closed-back headphones to stop the backing track bleeding into the mic.
- Comp before you send: choose the final takes yourself. Label doubles, harmonies and extra vocals clearly in file names.
6. Editing and Vocal Tuning Before the Mix
- Editing is part of production, not mixing. Tight drums, bass locked to the kick and guitars on the grid are the standard in modern rock and metal – and they should be done before the mix.
- If your tracks need editing, I’ll tell you before we start (for example: vocals need tuning, drums need aligning). I can do it, but it’s a separately paid service.
- Better unedited than badly edited. Some drum edits can’t be undone. If you’re not sure, send the drums unedited and tell me.
- Vocal tuning is an artistic decision, so it should be done by the people who recorded the vocals. Some artists want subtle correction, some want none, some want it tuned hard as an effect. You know your vocalist’s sensibility better than anyone.
- Clean up noise carefully: fade out hiss and amp hum between phrases, but don’t cut breaths or note tails too short.
7. How to Export Tracks for Mixing: Final Checklist
- Same start point: every track starts at the same point (e.g. bar 1 / 0:00), even if the instrument enters mid-song.
- Native sample rate: export at the rate you recorded in – don’t convert it. No normalisation, no dithering.
- Bit depth: 24-bit or, ideally, 32-bit float– float protects against clipping on export.
- Bypass the master bus– no limiters, compressors or EQ.
- Bypass mix processing on channels. Creative effects that define a part (a specific delay, a telephone filter) can be printed – ideally as a separate wet track next to the dry one.
- Mono as mono: don’t export mono sources as fake stereo.
- Remove unused and muted takes.
- Naming: clear and numbered, e.g. 01_Kick_In.wav, 02_Kick_Out.wav, 12_Gtr_L_DI.wav.
- Test it: import all files into an empty session and check that everything plays in sync.
What to Send Your Mixing Engineer (ZIP Checklist)
- All multitracks (WAV).
- MIDI files: tempo map (BPM and time signature changes) and any drum MIDI.
- Your rough mix.
- 1–2 reference tracks you love the sound of.
- Lyrics and a short note: what each track is, important moments, anything not to change.
- Song name and BPM in the folder name.
Send it via Google Drive, Dropbox or WeTransfer.
Common Mistakes When Preparing Tracks for Mixing
- Sending stems instead of multitracks.
- Old strings or drum heads.
- No DI tracks.
- Clipped or normalised files.
- Tracks starting at different points.
- Drum plugin reverb and compression printed on the tracks.
- Untuned or uncomped vocals with no information on what to do with them.
Ready for Online Mixing and Mastering?
Turnaround is about 2 weeks per song and about a month for an album. Mastering only? See how to prepare your mix for mastering.