Wojtek Wiesławski
Tutorials

De-esser Mixing Tricks: 5 Uses Beyond Sibilance

How a de-esser can tame vocals, bass, kick, acoustics and the mix bus — dynamically, without EQ holes.

Chapters

Everyone reaches for EQs and compressors and forgets a tool most people only associate with taming “S” sounds. In this episode Wojtek Wieslawski shows how he uses a de-esser on almost every source ⁠—⁠ as precise, dynamic control of a chosen band. The examples use DMG Audio Essence.

How to set a de-esser

Three parameters do the job: the frequency you want to control, the ratio (gentle: 3⁠–⁠5:1, aggressive: 10⁠–⁠20:1) and the threshold, set by ear while checking several different phrases.

1. Muddy vocals

Low mids cloud the vocal. An EQ cut removes that band all the time ⁠—⁠ including in higher, open passages where it gives the voice body. A de-esser around 140 Hz at roughly 15:1 only reduces it when it builds up. The boom goes, the body stays.

2. Uneven bass

Many bass parts aren’t even from note to note. A de-esser working only below 200 Hz, with a moderate ratio, keeps the low end in check and leaves everything above untouched. The mix gets lighter and more open.

3. Kick: boxiness and attack

The first de-esser, set aggressively around 250 Hz, removes the kick’s “wooden” tone. A second one, with a very fast attack around 4 kHz and a lower ratio, evens out the click. The kick sounds more “rock”.

4. Acoustic guitar

Two de-essers again: one for the low mids (around 135 Hz), another for the honk around 500 Hz. Unlike a static cut, the higher passages don’t end up sounding hollow.

5. Mix bus

Wojtek recalls advice from a well-known American mastering engineer: to start mastering, all you need is a precise EQ and a de-esser. On the mix bus it’s all subtle moves ⁠—⁠ for example just above 100 Hz ⁠—⁠ so the mix opens up and the de-esser tames excess low end from the kick.

FAQ

How is a de-esser different from a regular EQ?
It’s dynamic: it cuts the band only when it crosses the threshold, not all the time.

Is a de-esser on the master bus a good idea?
Yes, with very gentle settings ⁠—⁠ for example to control excess low end.

Tools in this episode

  • Reaper (DAW)
  • DMG Audio Essence (de-esser)
  • Hertz Drums Rock Pack
  • Guitar Rig 7
  • Submission Audio DjinnBass 2

Work on your music

Explore mixing services