How a Compressor Works: Exercises That Make You Hear It
Threshold, ratio, attack and release demonstrated on a snare — with ear-training exercises.
Chapters
You’ve watched dozens of compression tutorials and still can’t hear what the basic controls do? In this episode Wojtek Wieslawski explains the compressor using a snare drum — no unnecessary theory, just exercises that make the difference audible.
What a compressor does
A compressor evens out level: it automatically turns loud sounds down relative to quieter ones. And by setting how quickly it reacts, you shape the character of the sound. Every compressor has the same four controls: threshold and ratio decide how hard the signal is compressed, while attack and release decide what that compression sounds like.
Threshold and ratio
Threshold is the level where the compressor starts turning things down. Some compressors (such as the Distressor or 1176) have an input control instead — it works the other way round: more input means more compression. Ratio sets how strongly it reacts: at 4:1, a signal 4 dB over the threshold comes out 1 dB over; at 10:1, 10 dB over becomes 1 dB. 20:1 is effectively a limiter.
What can trick you
Changing attack or release also changes the amount of compression and the output level. In the example, at the fastest attack the snare gets about 15 dB of reduction, at the slowest only about 6 dB — and it gets much louder. That’s why it’s so hard at first to tell what each control is doing.
Attack exercises
Set a high ratio and a threshold that gives the snare 10–12 dB of reduction, then match the level with make-up gain. Now switch between the fastest attack and about 20 ms. With the slower attack a sharp crack — a click — appears at the start of each hit; at the fastest you mostly hear the tail. On the waveform it shows as a spike at the start. Want less snare snap or pick attack? Shorten the attack. Want to emphasise transients? Lengthen it.
Release exercises
With attack around 10 ms, switch between the fastest and slowest release. A fast release lets go of the tail quickly; a long one holds on to the end and swallows the decay. A faster release gives an aggressive, explosive snare — typical of modern metal and heavy rock. A longer one fills the space between hits, but shouldn’t kill the tail entirely.
Practise in solo, but in a real mix always set compression in the context of the whole band.
FAQ
Why can’t I hear what attack does on a compressor?
Because changing attack also changes the amount of reduction and the level. Practise with heavy compression and matched levels while switching between extreme settings.
What’s the difference between input and threshold?
They work in opposite directions: lower the threshold for more compression, raise the input.
Tools in this episode
- FabFilter Pro-C
- TDR Molotok (darmowy)