Wojtek Wiesławski
Tutorials

Stereo Widening in Mixing: Sound Wider Without Losing Mono

Multiband imaging, phase correlation and group widening — a wider mix that still works in mono.

Chapters

You compare your mix with references and they sound wider ⁠—⁠ even though everything is already panned hard left and right? In this tutorial Wojtek Wieslawski shows several ways to get a wider, more spacious mix, and the limits you shouldn’t cross.

An imager on the master ⁠—⁠ quick, but not always better

The simplest move is a basic imager on the master, such as DMG Audio’s free TrackControl with its “wide” function. The recording gets wider, but not necessarily better: whatever is more stereo is more “in your ears”, so unwanted frequencies that were hidden in mono come forward.

Multiband imaging

A better option is an imager that splits the spectrum into bands, such as Ozone Imager. Each band gets its own width. In the example Wojtek narrows the band where a boxy tone came out of the vocals and guitars, widens the lower mids and a touch of the top, and keeps the low end closer to mono. The difference is subtle but clear.

How wide can you go?

Not infinitely. Watch the correlation meter ⁠—⁠ it should stay above zero. Below zero, the left and right channels are out of phase and start cancelling. Phones, Bluetooth speakers and boomboxes have a single driver or two close together, so an overly wide mix will sound bad on them.

Widening groups, effects and cymbals

  • Guitar group: wider through the middle of the spectrum, narrower at the very top and bottom (below about 100 Hz).
  • Vocals: instead of widening the whole vocal, widen the effects ⁠—⁠ reverb and delay. The lead stays centred while the space around it grows.
  • Drums: widen just the cymbals, roughly from 5 kHz up.

A great mix is the sum of many small, good moves like these.

FAQ

Can stereo widening hurt a mix?
Yes, if correlation drops below zero. In mono and on small speakers parts of the sound then cancel out.

Should I widen the bass and kick?
Usually not ⁠—⁠ keep the low end close to mono.

Tools in this episode

  • Cubase (DAW)
  • DMG Audio TrackControl (darmowy)
  • iZotope Ozone Imager

Work on your music

Explore mixing services

Music courtesy of: Rusted Teeth ⁠–⁠ Burn The Dark.