Wojtek Wiesławski
Tutorials

How to Find Problems in Your Mix in 5 Minutes: A Simple Band Test

Eight frequency bands on the master as a diagnostic tool — what too much or too little of each one means.

Chapters

You can hear something’s wrong with your mix but can’t put a name to it? Heavy, flat, lifeless, muddy, harsh ⁠—⁠ all those words usually point to one problem: frequency distribution. In this episode Wojtek Wieslawski shows a trick he wishes someone had shown him over a decade ago.

Why EQ on the whole mix

For diagnosis, you put an EQ on the master. On the full mix it’s much easier to hear how instruments interact and where frequencies pile up than on individual tracks. It’s a diagnostic tool, not the fix.

Eight bands

The values are approximate ⁠—⁠ in any mix they may shift a little either way.

  1. Sub-bass (about 16⁠–⁠70 Hz)—⁠ the ultra-low end of kick, bass and keys; felt more than heard. Too much: the mix is flooded and heavy. Too little: no weight or power.
  2. Bass (about 60⁠–⁠200 Hz)—⁠ the rhythm section: kick, snare, bass, the low end of guitars. Too much: boomy. Too little: thin, with no foundation.
  3. Low mids (about 200⁠–⁠500 Hz)—⁠ the low harmonics of most instruments and the most troublesome band, where the mud lives. Too much: muddy. Too little: guitars and vocals turn thin.
  4. Mids (about 500 Hz–1 kHz)—⁠ too much: it sounds like a phone earpiece. Too little: keys and guitars lose their character.
  5. Upper mids (about 1⁠–⁠2 kHz)—⁠ too much: metallic and fatiguing. This is also the core of the vocal, so a heavy cut strips its tone.
  6. High mids (about 2⁠–⁠4 kHz)—⁠ the speech-intelligibility range that decides whether instruments cut through. Too much: masked consonants, lispy sibilance. Too little: no definition.
  7. Presence (about 4⁠–⁠6 kHz)—⁠ clarity of vocals and instruments. Too much: it stabs your ears like crushed ice. Too little: the mix loses definition.
  8. Highs (above about 6 kHz)—⁠ too much: hissing vocals and a tiring mix, especially noticeable on phones and laptops. Too little: dark, closed, no air.

The test in practice

On the example mix the biggest problem showed up around 200 Hz ⁠—⁠ “steps” around 60⁠–⁠200 Hz and above 400 Hz confirmed the mix was muddy. That’s the clue: switch off the master EQ and cut that band on the guitar, bass, keys and vocal groups.

If guitars and keys get cleaner but the snare loses body (around 200⁠–⁠250 Hz), cut on the guitars and keys, not the snare. The same with presence: if boosting 4⁠–⁠6 kHz makes the vocal sharp and clear but the guitars start to sting, brighten only the vocal group. The rule: first remove what’s annoying, then add.

A Pro-Q 3 preset with this band split is available to download under the video. In other EQs, recreate roughly the same ranges.

FAQ

How can I diagnose a mix problem quickly?
Split the spectrum into several bands with an EQ on the master and listen to which band changes the mix the most when cut or boosted.

Should I fix the mix with master EQ?
Better to treat it as a diagnosis: find the band, switch the EQ off and fix it on the relevant instrument groups.

Tools in this episode

  • FabFilter Pro-Q 3 (preset z podziałem na pasma do pobrania pod filmem)

Work on your music

Explore mixing services